Price list · 4 of 8
Viking Igniter or Burner Assembly Cost
The cooking band: a burner that clicks and never lights, or lights and will not hold.
Published band
$180$440
Igniter or burner assembly. The figure you are given on the day sits inside that span and is agreed with you before anything is dismantled.
$89 to come out
$89 flat brings a technician out and pays for the whole diagnosis, and it is taken off the bill the moment you approve the repair.
This is the cooking line on a schedule that otherwise belongs to dishwashers, and it is here because the business repairs both. It covers the igniter that starts a surface burner and the assembly that burner sits in. Viking Repair Denver gives the figure before the range is opened up — (303) 729-0972.
What an igniter and a burner assembly have in common
They fail into one another. A burner that has been lighting late puts its electrode through weeks of sparking it was never meant to do, and an electrode arcing against a scorched seat rarely leaves that seat undamaged. Both are looked at while the top is open, because doing one and coming back for the other suits nobody.
Why the span is as wide as it is
At the bottom is a single igniter on a rangetop that comes apart in minutes. At the top is an assembly on an appliance that has to be drawn forward to be reached, with the seat under it cleaned back to bare metal first. You get one figure, before the work rather than after it, less the $89 already paid.
What that figure covers
- The igniter or the burner assembly, genuine or factory-approved, fitted and then lit under watch
- Clearing the seat the new part has to sit in, and the ports around it
- Taking every burner through a light and a low setting before anyone packs up
- Being told plainly when the parts are sound and the set-up for this altitude is the answer
What is a different job
- Work on the gas line behind the appliance, which is a gas fitter and a separate bill
- Oven heating faults under the same range, quoted from a published band of their own
- Setting an appliance up for this elevation, which is not a repair and not part of this band
What decides where in the span you land
- The igniter alone, or the assembly with it
- A cracked electrode is a small part. A burner head and its seat, pitted to the point where nothing sits flat any more, is the top of this span.
- How many burners are misbehaving
- One burner out of step is usually a fault. Every burner doing the same thing points instead at how the range was set up for this elevation.
- What has baked in underneath
- Spillage cooked hard around a burner seat has to come off before anything new will sit properly, and on a range run for years with the fault that is real time.
- Whether the spark is even the problem
- A burner that clicks and will not light is not always an ignition fault, and the two possibilities are told apart before either one is quoted.
The whole schedule, six bands and the call-out Every published band on one page, with what each one covers.